*PLEASE NOTE LUBE IS NO LONGER INCLUDED IN THIS KIT*
Bullet Size Kit
427 Diameter
New
90053
The Lee Lube and Size Kit is one of the fastest and easiest ways to lubricate and size cast bullets.
The sizing die that comes with the kit fits in any press that accepts standard 7/8"-14 threaded dies.
Bullets are pushed through the sizing die nose first, so no special top punches are needed.
Gas checks are automatically seated and crimped in place.
Sized bullets are captured in the special container.
Material: Steel Sizing Die, Plastic Hopper
Function: Size cast bullets
Notes:
Comes in red plastic case.
DOES NOT INCLUDE LUBE.
Lee recommends bullets be relubed after sizing to be sure the sized portion is coated with Alox.
All lead bullets must be lubricated, but it is
not absolutely necessary to size all cast bullets.
Bullets must be sized if they are so large that they expand the case too much to freely enter the gun's chamber.
Sizing sometimes helps accuracy by making the bullet uniform in diameter.
Sizing helps ensure uniform start pressure and better accuracy.
Gas checks can be installed with this tool.
Simply place the gas check on the base of the
bullet before sizing.
Directions for Use
Lubricating Bullets:
1. Place bullets in provided red plastic container and
drop in the included Lee Liquid Alox onto the bullets.
2. Gently shake the bullets in an orbital motion to coat the bullets.
If they do not coat completely, add a little more lube.
3. Spread the bullets onto waxed paper and let dry overnight.
4. Load at least one bullet into a case and check to be sure it easily chambers in the gun.
If it fits tightly, you must resize the bullet before loading.
Sizing Bullets:
1. Screw the sizing into any standard reloading press.
Exact depth is not important.
2. Install the bullet punch into the ram.
This fits all rams that use standard shellholders.
3. Place the red plastic container with the
lubed bullets inside on top of the sizing die.
4. Place bullet on the punch and push the
bullet through the die.
5. When 3/4 of the bullets have been loaded.
Lift the red plastic container off the die.
Invert the holder before opening.
6. For rifle and hot pistol loads, it is best
to relube the bullets to ensure the sized
portion is recoated.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We are a Factory Direct Dealer of Lee® Precision, Inc.
ALL MANUFACTURERS WARRANTIES WILL APPLY !
All of our products are BRAND NEW in the box; and contain all of the parts, materials and documentation.
You can expect and will receive prompt delivery of your item.