Skip to product information

Lee Deluxe Automatic Processing Press (APP) Single Stage Press Kit # 90933 New!

SKU: 90933

Country of Manufacture: United States

Bundle Listing: No

Model: Processing Press

Country/Region of Manufacture: United States

Ammunition Type: All

MPN: 90933

Press Type: Single Stage

Brand: Lee Precision

Type: Reloading Press

Lee Deluxe Automatic Processing Press (APP)

Single Stage Press Kit 



  • The APP Automatic Processing Press
  • Automation Kit
  • X-PRESS shell holders #2, #4 and # 19
  • Bottle Adapter
The Lee Deluxe Automatic Processing Press (APP) 
Single Stage Press Kit is the first press of its kind with 
the ability to mount the die to the top or bottom of the press.

 This die mounting flexibility allows previously unheard of 
automation on a single station press. 

Now you can deprime, primer pocket swage,
 bulge bust or size cast bullets as fast as you can operate the lever.

The press is actually heavy for its compact size.

 It is manufactured from a variety of materials best suited 
for the application. 

The lever or handles are made of steel and are topped 
with a molded power grip. 

The grip is completely symmetrical making either hand 
operation a delight. 

The upper and lower die carriers are aluminum and the 
low stress items are nylon or acetal copolymer. 

The upper carrier rides on two centerless ground and 
roller burnished columns. 

The upper die carrier is counter balanced by a centrally mounted 
coil spring. 

The counter balance prevents the handle from falling and 
pinching a finger.

The APP is a “frameless” design with nearly all the forces 
going directly to the dies through the steel linkages 
rather than through the frame. 

As a single stage reloading press it has almost unlimited 
visibility and hand clearance.

 Mounting is easy on any bench or table with no under swing. 

 Dirty, gritty, lead contaminated spent primers are 100% 
captured in a screw top bottle. 

The top carrier and base are machined to accept
 Lee Breech Lock bushings, so they will accept standard 
7/8-14 dies of any manufacture

The APP also uses standard press shell holders from 
most manufactures. 

Includes one Spline drive breech lock bushing and 
universal type shell holder quick-change adaptor.

A little over three inches of stroke allows sizing of the
 larger belted magnum cartridges. 

Priced less than nearly all single station presses makes
it a perfect starter press or a perfect companion
 press to an expensive progressive. 

But the APP is so much more. 

This Deluxe model includes the Automation package.

Now you can deprime cases, size cast bullets, 
swage primer pockets, etc. as fast as you can cycle the lever!

The Deluxe model includes a revolutionary kind of 
case and bullet feeder. 

Jaws automatically open and grasp the bullet or case. 

They then rapidly position the case or bullet into the 
operating position. 

Once in position the jaws instantly open and return for the 
next case or bullet. 

It is fascinating just cycling the press empty watching 
the jaws open and close as it cycles back and forth.

The APP gets its speedy operation in part by the use of a 
new shell holder, called the X-press shell holder

The shell holder allows the case to pass through the 
shell holder after the operations are performed. 

This Deluxe model includes the three most popular
 X-press shell holders (2, 4 and 19) that work on over 
60 different cartridges. 

The Deluxe model is complete with all the feed tubes, 
tube supports, risers and case slider. 

It even includes the 22-caliber bullet feed jaws.  


Press Type:
Single Stage

Handle Location:
Top Center

Spent Primer Collection System:

Dies Size Accepted:
Standard 7/8"-14 Thread

Die Bushing Accepted:

Mounting Hardware INCLUDED

Ram Stroke:
3 Inches

Die Bushing Brand Used:
Lee Breech Lock

We are a Factory Direct Dealer of Lee® Precision, Inc. 


All of our products are BRAND NEW in the box; and contain all of the parts, materials and documentation.

You can expect and will receive prompt delivery of your item.

We will ship your order within ONE DAY!

We are unable to accept returns on used, fitted, or altered parts. 
Returns must be in new, unused condition and in their original packaging.