The Lee Lube and Size Kit is one of the fastest and
easiest ways to lubricate and size cast bullets. The sizing
die that comes with the kit fits in any press that
accepts standard 7/8"-14 threaded dies.
Bullets are pushed through the sizing die nose first,
so no special top punches are needed.
Gas checks are automatically seated and crimped in place.
Sized bullets are captured in the special container
and a 4 oz bottle of Lee Liquid Alox bullet lube is included.
Material: Steel Sizing Die, Plastic Hopper
Function: Size cast bullets
Notes: Comes in red plastic case.
Lee recommends bullets be relubed after sizing to be sure
the sized portion is coated with Alox. All lead bullets must be
lubricated, but it is not absolutely necessary to size all cast bullets.
Bullets must be sized if they are so large that they
expand the case too much to freely enter the gun's chamber.
Sizing sometimes helps accuracy by making the bullet uniform in diameter.
Sizing helps ensure uniform start pressure and better accuracy.
Gas checks can be installed with this tool.Simply place the gas check on the base of the bullet before sizing.
Alox Bullt Lube 4 oz Liquid
Lee Liquid Alox Lube coats the entire bullt in a very
thin film of lubricant.
This thin film dries to a soft, varnish-like finish that really
adheres to the bullt. Additionally, the dried coating will not
Easy to apply and eliminates the need for sizing of most cast bullts.
While it works well with all cast bullts, it works best with the
micro band bullts, which are designed for tumble lubing.
Quantity: 4 oz
Melting Point: Unknown, already liquid
Container: Plastic Bottle
Features: 1 bottle will coat 1,000 bullts
Notes: Liquid Alox does not need to be heated to be applied.
We are a Factory Direct Dealer of Lee® Precision, Inc.
ALL MANUFACTURERS WARRANTIES WILL APPLY !
All of our products are BRAND NEW in the box; and contain all of the parts, materials and documentation.
You can expect and will receive prompt delivery of your item.