Skip to product information

90048 Lee Precision Original .358 Sizing Kit # 90048 New!

Sorry, this item is out of stock
SKU: 90048


Bullet Size Kit

358 Diameter



The Lee Lube and Size Kit is one of the fastest and easiest ways to lubricate and size cast bullets.

The sizing die that comes with the kit fits in any press that accepts standard 7/8"-14 threaded dies.

Bullets are pushed through the sizing die nose firstso no special top punches are needed.

Gas checks are automatically seated and crimped in place.

Sized bullets are captured in the special container.

Material: Steel Sizing Die, Plastic Hopper
Function: Size cast bullets


Comes in red plastic case.


Feel free to add it to your order,

LEE 4oz Alox Lube # 90177

Lee recommends bullets be relubed after sizing

to be sure the sized portion is coated with Alox.

All lead bullets must be lubricated, but it is

not absolutely necessary to size all cast bullets.

Bullets must be sized if they are so large that they expand the case too much to freely enter the chamber.

Sizing sometimes helps accuracy by making the bullet uniform in diameter.

Sizing helps ensure uniform start pressure and better accuracy.

Gas checks can be installed with this tool.

Simply place the gas check on the base of the

bullet before sizing.

Directions for Use

Lubricating Bullets:

 1. Place bullets in provided red plastic container and drop in the included Lee Liquid Alox onto the bullets.

2. Gently shake the bullets in an orbital motion to coat the bullets.

If they do not coat completely, add a little more lube.

3. Spread the bullets onto waxed paper and let dry overnight.

4. Load at least one bullet into a case and check to be sure it easily chambers.

If it fits tightly, you must resize the bullet before loading.

Sizing Bullets:

1. Screw the sizing into any standard reloading press.

Exact depth is not important.

2. Install the bullet punch into the ram.

This fits all rams that use standard shellholders.

3. Place the red plastic container with the

lubed bullets inside on top of the sizing die.

4. Place bullet on the punch and push the

bullet through the die.

5. When 3/4 of the bullets have been loaded.

Lift the red plastic container off the die.

Invert the holder before opening.

6. For rifle and hot pistol loads, it is best

to relube the bullets to ensure the sized

portion is recoated.



We are a Factory Direct Dealer of Lee® Precision, Inc. 


All of our products are BRAND NEW in the box; and contain all of the parts,

materials and documentation.

You can expect and will receive prompt delivery of your item.

We will ship your order within ONE DAY!

We are unable to accept returns on used, fitted, or altered parts. 
Returns must be in new, unused condition and in their original packaging.