Skip to product information
L. E. Wilson Chamber Type
A favorite among benchrest shooters.
A chamber type bull*et seater positively controls
both bull*et and cartridge case alignment.
The case and bull*et are completely captured by the die prior to the
bull*et being pushed straight into the case by a close-fitting seating stem.
This style of bull*et seater works more accurately
than a conventional (7/8"-14 TPI) bull*et seating die.
L. E. Wilson Chamber Type
Inline Seater Die
The LE Wilson Chamber Type Seater Die
is noted for precise accuracy.
Both the bull*et and case are firmly held in perfect alignment
as the
bull*et is seated in the case.
Hand-die design for use with a mallet or
an arbor press.
Not for use on a conventional press.
A favorite among benchrest shooters.
A chamber type bull*et seater positively controls
both bull*et and cartridge case alignment.
The case and bull*et are completely captured by the die prior to the
bull*et being pushed straight into the case by a close-fitting seating stem.
This style of bull*et seater works more accurately
than a conventional (7/8"-14 TPI) bull*et seating die.
Seating depth adjustments are made by turning the screw inside the
cap (3/8" - 24 TPI).
This is one of the most accurate bull*et seaters ever made.
Notes:
- Die positively controls both bull*et and cartridge case alignment.
- Bull*et is pushed into the case mouth by a close-fitting bull*et seating stem (drift).
- This die works in an Arbor or hand press only.
L E Wilson also makes seating stems (their term "drifts")
for VLD ( Very Low Drag ) type
bullets which drop in to these dies.
We are unable to accept returns on used, fitted, or altered parts.
Returns must be in new, unused condition and in their original packaging.