Skip to product information
Large Case Trimmer Cutter & Lock Stud with
Case Length Gage and Shellholder
For: 50 BMG
90401+90010
NEW!!
90401
This handy tool is made from hardened steel, trimming cases to correct
SAMMI specifications has never been easier.
The shaft on the lock stud allows the setup to be turned by hand or with
an electric drill.
Fits:
Lee Case Length Gages and Shellholders
Function:
Lock Stud holds the shellholder, Trimmer Cutter holds the Length Gauge
Material: Hardened Steel
Notes:
Trim length cannot be adjusted as with bench mounted case trimmers.
Large Cutter and Lock stud has 1/4" shaft for fitting in a drill and the
regular Cutter and Lock Stud has a 3/8" shaft for fitting in a drill.
+
Case Length Gage and Shellholder
50 BMG
90010
The Lee Case Length Gage is a precise and easy way to trim brass
cases to length and square the case mouth.
Requires a Lee Cutter and Lock Stud to function.
The first step to successfully trimming brass cases with the Lee
Case Length Gage and Shellholder is to take the Lee Lock Stud
and screw it into the shell holder.
cases to length and square the case mouth.
Requires a Lee Cutter and Lock Stud to function.
The first step to successfully trimming brass cases with the Lee
Case Length Gage and Shellholder is to take the Lee Lock Stud
and screw it into the shell holder.
Next the Length Gage needs to be screwed into the Case Trimmer
Cutter.
The length gage is set to cut each case within SAAMI specifications.
Cutter.
The length gage is set to cut each case within SAAMI specifications.
After the tools are screwed together the next step is case trimming.
Just put the empty brass into the shellholder, insert the case length
gauge into the empty piece of brass and turn the cutter until the piece
of brass is trimmed to the predetermined length.
It is that easy to get consistent case lengths and square case mouths
helping to keep reloaded ammo as accurate as possible.
Material: Hardened Steel
Features: Caliber specific Shellholder and length gauge
gauge into the empty piece of brass and turn the cutter until the piece
of brass is trimmed to the predetermined length.
It is that easy to get consistent case lengths and square case mouths
helping to keep reloaded ammo as accurate as possible.
Material: Hardened Steel
Features: Caliber specific Shellholder and length gauge
~~~~~~~~~~~~~~~~~~~~
We are a Factory Direct Dealer of Lee Precision, Inc.
ALL MANUFACTURERS WARRANTIES WILL APPLY !
All of our products are BRAND NEW in the box; and contain all of the parts,
materials and documentation.
You can expect and will receive prompt delivery of your item.
We will ship your order within ONE DAY!
We are unable to accept returns on used, fitted, or altered parts.
Returns must be in new, unused condition and in their original packaging.