Features:
- Micrometer adjustable head fines tunes trim length in .001" increments
- Larger stop screw adjustment
- Polished Nickel Handle
- Stainless Steel construction
- Case trimmer supports the case body with a cartridge specific case holder which simulates the chamber of the firearm
The
L.E. Wilson Stainless Steel Case Trimmer with micrometer is unique in
that it supports the case body through the trimming operation using
holders which simulate a rifle chamber.
Cases are consistently trimmed
square and to the desired length.
The trimmer will perform inside neck
and primer pocket reaming with optional attachments.
Trimmer should be
mounted in a vise for use.
Additional features include a positive stop
to trim cases to a uniform length and solid construction from Aluminum
alloy and steel.
This new model comes with micrometer adjustable head to
fine tune case trim length in .001" increments.
It also features a larger stop screw adjustment from the original case trimmer making for a firmer stop and it ships with a polished nickel handle.
All
L.E. Wilson trimmers are now made with a rake-tooth cutter. This cutter
has the advantage over a straight-tooth cutter of cutting faster and
with less pressure required and will be found superior for all purposes
within reason. The cutter has been designed expressly for the job it has
to do, which is to face off amounts from zero to about 1/32". If
desired to face off larger amounts it may be necessary to adjust the
stop screw so that the material will be removed in more than one
operation. By doing the job in steps the cutter is allowed to contact
the stop often enough to steady the cut and prevent "grabbing".
Technical Information:
Material: Stainless Steel
Collets Used: No
Collets Included: No
Pilots Used: No
Pilots Included: No
Notes: Place
the case in the Trimmer Case Holder (Not Included), tap the case head
on a firm surface, and place in the trimmer. Remove the case by tapping
the case mouth. Cartridges with minimal body taper may require different
Trimmer Case Holders for fired and new cases. Q-Type Trimmer Case
Holders hold the handgun case with an easy to use cross pin and cannot
be used with the Case Holder Clamp.